Fly Ash Building ProductsFly Ash Solid Blocks
Load-bearing solid concrete blocks to IS 2185 Part 1, for structural masonry and boundary walls.
Where the masonry has to carry load rather than just fill a frame, solid blocks give the compressive strength and the mass. Same dimensional accuracy as the hollow units, so mortar and plaster consumption stays low.
Specifications
| Standard | IS 2185 (Part 1) |
|---|
| Sizes | 400 x 200 x 100 / 150 / 200 mm |
|---|
| Compressive strength | 7 to 12.5 N/mm2 |
|---|
| Water absorption | 10 percent maximum |
|---|
| Dry density | 1800 to 2100 kg/m3 |
|---|
| Drying shrinkage | 0.06 percent maximum |
|---|
| Fly ash content | 35 to 50 percent of the mix |
|---|
| Used for | Load-bearing walls, boundary walls |
|---|
| Packing | Palletised, shrink-wrapped |
|---|
| HS Code | 6810.11 |
|---|